How to Select the Right Cable: Don’t Just Look at the Model, Sort Out These Key Points

Nov 13, 2026

Leave a message

wire and cable

When working on projects, many purchasers and site engineers go straight to the model once they get a cable list, assuming a matching model means everything is fine. But once the cables are laid and energized for a long time, issues like overheating, ageing, insulation breakdown and substandard flame retardancy mostly stem from poor early selection. Cable selection is not just picking specifications from a datasheet. You need to sort out conductors, insulation and sheathing, voltage ratings, service environments and applicable standards first, then match them against the load and laying conditions of the project, checking every detail step by step.

Let's start with conductors, where people often cut corners and run into trouble. Oxygen-free copper remains the mainstream option. It delivers stable resistivity, rated current-carrying capacity and controllable temperature rise under long-term operation, so it is the first choice for most power circuits, control circuits and critical uninterrupted power supply applications. Copper-clad aluminium has drawn plenty of enquiries lately for its lower cost and lighter weight, yet its resistivity is considerably higher than pure copper. Its current-carrying capacity has to be derated for the same cross-section, and joints are highly prone to oxidation and overheating. It is not recommended for continuously fully loaded circuits, critical power supply loops or equipment with frequent start-stop cycles. It may only be considered for temporary wiring, low-load applications with tight budgets, and only if joint anti-corrosion treatment is properly arranged. Do not simply apply the current-carrying parameters of copper cables directly. Some clients also enquire about aluminium conductors, widely used for long-span overhead lines and large-capacity distribution mains. Aluminium has a different expansion coefficient from copper, so dedicated aluminium lugs and anti-galvanic corrosion measures are mandatory. Otherwise, loose and overheated joints will likely emerge after two or three years in service.

 

Many people mix up insulation and sheathing, though they serve entirely different purposes. The insulation layer wraps the conductor directly to isolate live parts and prevent leakage and breakdown. The outer sheath provides mechanical protection against abrasion, moisture, oil, UV radiation and external compression. Standard PVC insulation and sheathing are cost-effective and widely processed, suitable for ordinary fixed indoor wiring, yet they have a limited temperature threshold and are not ideal for high-temperature zones or areas with fire hazards. XLPE, cross-linked polyethylene insulation, dominates power cables thanks to its good heat resistance, superior electrical performance and higher current-carrying capacity for continuous long-run operation. For direct burial outdoors, damp underground pits or exposure to acids and alkalis, corrosion-resistant and waterproof special sheathing compounds are required. Low-smoke zero-halogen sheathing is often a mandatory requirement for densely occupied spaces such as utility tunnels, hospitals and metro stations. In case of fire, it produces less toxic smoke to facilitate evacuation. It is also necessary to check fire performance classification under GB 31247, as flame-retardant and fire-resistant grades follow distinct test protocols. Ordinary flame-retardant cables cannot replace fire-resistant cables for fire protection circuits; fire-resistant cables must maintain power supply for a specified duration under defined flame exposure, a point heavily checked during acceptance.

Rated voltage deserves careful attention too. It defines the continuous stable voltage the cable can withstand, rather than a simple match to the nominal circuit voltage. For reference, 0.6/1 kV cables fit standard low-voltage distribution. For circuits feeding inverters, servos and other equipment with harmonics and voltage spikes, upgrading to a higher voltage class is advisable, since recurring voltage surges accelerate insulation degradation. Many small projects take shortcuts by using undersized low-voltage cables for volatile circuits. No obvious fault appears in the short run, yet insulation deteriorates gradually over years, pushing up failure risks substantially.

Service environment is frequently overlooked during selection. Standard cables generally work for dry indoor tray routing, while overhead outdoor layouts call for UV-resistant grades. Direct burial needs protection against soil corrosion and crushing from gravel, and steel tape armouring should be adopted where necessary. In cold regions, regular PVC sheathing tends to stiffen and crack at low temperatures, so low-temperature formulations are required. Workshops with heavy oil or chemical exposure demand customised sheathing materials. Laying methods also affect current-carrying capacity: tightly packed cables inside enclosed trays dissipate heat poorly, so capacity must be derated accordingly.

 

ce3e23871070137cd53bb0940d1e8ef9

 

cables

Project Case

We once supported a ground-mounted photovoltaic project in the Middle East. The client's initial proposal simply specified general PV cables, without taking local high UV intensity, large diurnal temperature swings and occasional sand abrasion into account. After reviewing the site conditions, our technical team revised the scheme, adopting H1Z2Z2-K solar cables with cross-linked polyolefin insulation and sheathing, certified to meet relevant standards. The selected conductors were oxygen-free copper, sized with proper derating to cope with high ambient temperature, while the outer layer was formulated for strong UV resistance, ozone resistance and low-temperature flexibility. We delivered the full scope including DC connection cables and tray-run trunk lines. After commissioning, the system maintained stable output, with no signs of sheath cracking or abnormal heating after more than one year of operation. The client later extended cooperation for subsequent phases of the plant.

 

Intelligent Cables and Industry Trends

Smart monitoring cables have become a hot topic, but many buyers only grasp the concept without knowing their limits. The core principle relies on integrated sensing elements or distributed optical fibre to capture real-time data such as conductor temperature, partial discharge and sheath damage. Common monitoring approaches include distributed temperature sensing, partial discharge online monitoring and fault early-warning modules. This solution suits long-distance trunk lines, critical distribution networks and high-value industrial plants where unplanned outages carry heavy losses. It is worth noting that such systems have clear boundaries: monitoring hardware requires regular calibration, signal transmission can be disturbed by strong electromagnetic fields, and the whole set brings higher upfront investment. When sourcing, buyers should not blindly chase smart functions. They need to confirm which parameters truly need monitoring, check compatibility between sensors and backend platforms, and clarify the accuracy and alarm threshold of early-warning functions.

Looking ahead, stricter fire safety codes, higher demand for low-carbon materials and the rapid expansion of new energy will keep reshaping cable procurement. The market is also seeing uneven quality. Some suppliers cut costs by downgrading conductor purity or using recycled compound for insulation and sheathing. For project owners and contractors, reliable selection means sticking to traceable material specifications, verified test reports and matching certification rather than choosing solely based on the lowest quotation.

Wire machine

 

 

Send Inquiry